 |
|
|
KEY FEATURES:
- Supports input from up to 64 cameras.
- All 64 channels are coaxial, multiplex cables, reducing the number of cables required and simplifying installation.
- Supports up to 64 RS485, remote-controlled cameras.
- Pan, tilt and other cameras lens motions can be controlled either by coaxial, multiplex cable or RS485 remote-control signals.
- Cables can be up to 1,200 m long.
- The video loss detection function automatically detects camera malfunctions.
- All sequence and alarm modes can be adjusted as needed.
- User management features include operator number, password, level, and priority.
- Personal computer screen displays simplify set-up and management of alarm histories.
- Supports up to 80 alarm inputs and four alarm outputs.
- Supports output to up to four monitors.
- Character displays show date, time, camera number, camera title, and event information.
- Alarm history display shows up to 100 most recent alarms.
- The RS-485 camera ports allow remote surveillance.
- The RS-232C ports enable connection to personal computers or VTRs.
|
Specification:
| Power Source |
220V ~ 240V AC, 50Hz |
| Camera Input (1 ~ 16) |
1.0 V [p-p] / 75 ohm composite video signal
0.5 V [p-p] / 75 ohm data signal and
2.5 V [p-p] vertical timing pulse multiplexed |
| Camera Output (1 ~ 16) |
1.0 V [p-p] / 75 ohm composite video signal |
| Monitor Output (1 ~ 4) |
1.0 V [p-p] / 75 ohm composite video signal |
| External Input |
1.0 V [p-p] / 75 ohm composite video signal |
| External Output |
1.0 V [p-p] / 75 ohm composite video signal |
| RS-485 (Camera) Port |
RS-485 6-conductor modular jack |
| Data Port |
RS-485 6-conductor modular jack |
| Alarm Port |
25-pin D-sub connector |
| Serial Port |
9-pin D-sub connector |
| Camera Switching Input |
RCA pin jack |
| Ambient Operating Temperature |
-10°C ~ +50°C |
| Ambient Operating Humidity |
Less than 90% |
| Dimensions (W x H x D) |
420 x 88 x350 mm (without rubber foot) |
| Weight (approx.) |
6 kg |
|
The Panasonic WV-CU360CJ
System Controller
The Panasonic WV-CU360CJ system controller is designed to control the optional dome cameras through WJ-MP204 Data Multiplex Unit.
The WV-CU360CJ controller enables control of the camera lenses, electronic zoom, auto focus and slow and pan/tilt heads. It also enables selection of the camera by numeric buttons through the WJ-MP204 Data Multiplex Unit.
The WV-CU360CJ system controller enables two types of passwords for both Login and Set-up menus. This highly advanced video surveillance system controller delivers optimum performance at a competitive cost.
| TECHNICAL SPECIFICATIONS |
| Type |
Desktop system controller |
| Data Output/Input Port |
6- conductor modular jack (RS-485, full duplex) |
| Switching Functions WJ-MP204) |
Camera selection |
| Controller Number |
1 - 8 (Rotary Switch) |
| Unit Address Selection |
1 - 99 |
| Monitor Number Selection |
1 - 99 |
| Camera Number Selection |
1 - 199 |
| Lens function |
Iris/ Focus/ Zoom |
| Pan/Tilt |
Manual or Auto |
| Other Camera Controls |
Camera Setup, Camera Function |
| System Operation |
Camera selection, Alarm (Display/Suspend/Recall/Reset), Setup |
| Power Source |
9V DC, 400mA Use only AC Adapter model CU35AD270G |
| Power Consumption |
10W |
| Dimensions |
300 x 74 x 177mm |
| Weight |
1.3kg |
BACK TO PANASONIC CCTV
Pedagang dan pemasang kamera CCTV DVR, didukung tenaga ahli instalasi cctv yang profesional dan berpengalaman, dapat memberikan informasi dan solusi yang sesuai dengan kebutuhan dan budget anda untuk cctv dvr yang berkwalitas.
SPECIALIST IN CCTV INSTALLATION
CCTV Camera installations system designers, cctv engineers
Jakarta cctv resourcing, outsourcing , cctv sources - 021-33098899, 081316068899
|
