IP CAMERA - INTERNET CONFIGURATIONS - DIAGRAM IP KAMERA KE INTERNET
seting internet cctv untuk online kamera, setup dvr ke internet, pemantauan jarak jauh, kamera pengintai - cctv lewat internet , networks lan camera
Jual ip kamera vivotek, samsung, panasonic, sony call : 0813 1606 8899

 

Setting up DVR to be used from remote location:

DVR KE MODEM

  1. Connect your DVR to your router
  2. Use menu on DVR to assign internal IP and gateway and port number.

    This Local IP must be in the same Gateway range as the Router. If you are unsure check the Router and locate the Status section, or goto the Command prompt of Windows XP and type in ipconfig.

    Look for Gateway. If the Gateway is 192.168.1.1, then you can make the DVR's IP anything from 192.168.1.2 - 192.168.1.255.

    Also you will need to use the same SubNet Mask, which is typically 255.255.255.0, and also use the same gateway.
  3. Next find out what port your DVR uses. The easiest way to it is by reading the manual of your DVR. Look for the network section of it.

    Also if it comes with network software, check out if in the connection area the software shows the port number.

    Also check the Server software/Programming (Network section of it) to see if the port is listed.

    In many cases it will be as simple as just Port 80, which is an HTTP port.
  4. Set your router to forward chosen port to internal IP address of DVR.

    To access the Router itself, use the Gateway you just located. If the gateway is 192.168.1.1, then enter that into the location edit box of your browser and then click the Enter button. A username and a password are typically required, but it depends on a router. For Linksys use "admin", "admin". By default DLink doesn't require any username or password (It is highly recommended to change the default password).

    Once you're logged into the Router, in the Applications & Gaming Section / Servers of the Router, you need to add a Server/Application. Enter the port number and select TCP only. Where it says Port 0 to 0 enter the same port number twice. Or if your DVR uses for example, ports 3550, 4550, 5550, 6550, and there is nothing else utilizing these ports in between, then you can actually just enter one line, 3550 - 6550.

    Enter the DVR/Cameras internal IP.

    Enable it.
    Example
    If the port was 1024, and the Local IP is 192.168.1.200, then it would be:

    NAME = Anything you want
    Port = 1024 TO 1024
    TCP/UDP = TCP
    LOCAL IP = 192.168.1.200
    ENABLED = CHECKED

    OR

    NAME = Anything you want
    Port = 3550 TO 6550
    TCP/UDP = TCP
    LOCAL IP = 192.168.1.200
    ENABLED = CHECKED
  5. Set up additional entries for as many ports the DVR uses, to the same local IP. Check your DVR manual and it's networking section for all additional ports required. Also check the DVR software itself.

    If your router has enough free entries, you can seperate them. Use it like DVR_HTTP for the browser port, DVR_AUDIO for the audio port, etc.

    If you are going to use VNC to a PC DVR, then you would need to set up port 5900, and perhaps call it VNC_DVR, for example.
  6. You have a static IP so you don't need to use sevices like www.dyndns.org . You just enter your static IP and your router forwards packets to your DVR.
  7. ===============================================================================================

Using dyndns.org with your DVR

  • Create an account with a username and password.
  • Login
  • "Account" -> "My Service" -> "Add Host Services" -> "Add Dynamic DNS Host"
  • Enter and select hostname
  • Enter IP address of your computer
  • Click "Add host"
    In your DVR software:
    • Find DDNS network settings
    • Enable DDNS
    • Enter username, password and hostname from dyndns.org
    • Apply the settings

Then if your IP address changes, DVR software sends the data to dydns.org and updates it. This allows to access your computer from remote location by using not a weird IP address, but a user-friendly hostname.

USEFULL LINKS UNTUK PASANG DAN SETING DVR - CCTV INTERNET
Cara seting DVR CCTV ke internet menggunakan router modem untuk pemantauan jarak jauh, cctv online
networks camera, ip networking cameras, kamera pengintai jarak jauh , www.cctvjakarta.com

---> WHAT IS PORT FORWARDING

1.HOW TO CONFIURE LINKSYS ROUTER TO ADSL MODEM
Linksys router - DLink - TPLink

2.LINKSYS setup router modem in pdfr

3..TP LINK setup modem router to DVR

4..DLINK To DVR (dan wireless router dll)

5..TPLINK

6.LINKSYS ROUTER

7.DLINK Wireless router seting in pdf file

8..PASANG DVR KE ROUTER MODEM UNTUK LIHAT CCTV DI INTERNET

9. .Seting CCTV Internet - avtech dvr

101.Setting DVR Avtech ke Internet
AVC Series

11.seting IP Kameera ke internet
penjelasan lengkap ip kamera port forwarding dengan DLINK

. .

_____________________________________________________________________________________________________________________
KARYA USAHA SENTOSA .
CCTV VIDEO SECURITY CAMERA SUPPLIES AND INSTALLERS - PHONE : 021.3309.8899 . M0BILESS: 0813.1606.8899 . FAX 021 7326999
Website: www.cctvjakarta.com . email : cctvjakarta@yahoo.co.id, .YM cctvjakarta, Facebook INFO PASANG CCTV

HOME